Uzebox Forums

I have made another minor update to the BOM files as an availability fix but its also made the BOM a few pounds cheaper as a result. I swapped the 806 Ohm resistor 1751433 with the much cheaper and much more plentiful 9470204 and I replaced the link to the clone SNES pads on AliExpress with a link t...

Jubatian has replied to my email:

The Bootloader has 2 bytes free, that's a single AVR instruction. If a need for some simple bugfix arises, that might be possible to be juggled in, but that's all!

Grind is going from strength to stength. Its now got music and particle FX amongst other improvements

https://www.indieretronews.com/2024/04/ ... .html#more

I've updated the first post to add: 4 X 25 mm length flat head screws The Thingiverse Details page for this stick recommends M4 12 mm screws but they seem to be too small to be of any real use so I used 25 mm long flat head screws to screw the base in place. I screwed one of these 25 mm screws into ...

I broke out all timing so that it can optionally be overriden in the makefile on a per element basis. I'm going to go with what I think are reasonably safe timings for Hyperkin as defaults, and later on it might be discovered how to save few more cycles. You didn't say much about the results I post...

Setting Cura's Z Seam Alignment print setting to random did fix the issue I had with visible seams / banding along a couple of the corners of my first print so I have updated the first post to highlight the need to change this setting to avoid a simiar fate. I have also updated the photos of the ins...

D3thAdd3r wrote: ↑Tue Apr 16, 2024 12:45 pm I think we should consider abandoning the Set/GetSensitivity features of the SNES mouse as the Hyperkin doesn't support it(which implies in game sensitivity will need a software solution anyway...so why do 2 methods 1 of which isn't 100%).

I'm fine with that.

I thought CF might've built a few but not 105 so maybe that is the record? Uze's 300+ Uzeboxes that I mentioned may have mostly or all been sold as kits so Uze probably didn't build 300+? Seems CF is quite keen to re-enforce his position as head Uzebox makererer. The other person who will be in the ...

Is that what its going to be called, Uzebox Kitchen Sink?

105!

That's some hardcore Uzeboxery CF! I would suspect that means Lee will take third place then as I doubt he's made that many.