Expansion Port
Jump to navigation
Jump to search
Expansion Port
The Uzebox Expansion Port allows access to unused/free pins as well as those pins that can be share across devices, such as SPI. Users are always free to experiment with any of the pins, but keep in mind using unofficial devices on reserved pins could cause issues with programs that expect something else to be there. When designing something you wish for others to adopt, you should reference the official reserved list below and also discuss your case on the forums before you release it or order pre-made PCBs.
Official devices should assume 0.1 pins are soldered into the Uzebox, as that is what the official Uzenet module expects and devices need to cooperate.
Pin Diagram
GND|- -|MISO PA4|- -|MOSI PA5|- -|SCK PA6|- -|RESET PA7|- -|RX(UART/Serial) PD3|- -|TX(UART/Serial) PD5|- -|PB1 VCC|- -|PB2
Pin Status
GND - Free use PA4 - for SPI ram /CS PA5 - Free use PA6 - Free use PA7 - ESP_PRG PD3 - ESP_RST/'Soft' Power-on Switch (AVCore) PD5 - Reserved for Coin Counter (Uzebox JAMMA) VCC - Regulated 5v, Free
MISO - SPI interface, can be multiplexed(requires reserved /CS) MOSI - SPI interface SCK - SPI interface RESET - Reset button connection RX - UART, can be used by 1 device at a time TX - UART, can be used by 1 device at a time PB1 - Synchronous clock to external device(s) PB2 - Reserved for future use