does the kit include a power source (wall plug)?
because i'm planning on build one of these nice kits
Uzebox Forums
The open source retro-minimalist game console
EUzebox - a SCART based Uzebox for the EU
Re: EUzebox - a SCART based Uzebox for the EU
by greenpower » Mon Jun 13, 2011 8:47 pm
I know i'm too young, but it doesn't matters. Maybe i'm a newbie, but i can learn very fastly
- greenpower
- Posts: 55
- Joined: Mon Jun 13, 2011 7:48 pm
- Location: Benidorm, Spain
Re: EUzebox - a SCART based Uzebox for the EU
by Harty123 » Mon Jun 13, 2011 9:09 pm
Hi
No, a wall plug power supply is not part of the kit, because of the different standards for power sockets in several european countries. But you can use any wall plug supply with 9 .. 12V AC or DC ouput voltage and standard power plug.
About the status of the kits:
I will get the first 100 PCB's in the end of June. I will need then 1 week to prepare the kits. So I will start the delivery in July.
-Harty
greenpower wrote:does the kit include a power source (wall plug)?
because i'm planning on build one of these nice kits
No, a wall plug power supply is not part of the kit, because of the different standards for power sockets in several european countries. But you can use any wall plug supply with 9 .. 12V AC or DC ouput voltage and standard power plug.
About the status of the kits:
I will get the first 100 PCB's in the end of June. I will need then 1 week to prepare the kits. So I will start the delivery in July.
-Harty
Life's too short to remove usb safely
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
-
Harty123 - Posts: 334
- Joined: Wed Jan 12, 2011 9:30 pm
- Location: PM, Germany
Re: EUzebox - a SCART based Uzebox for the EU
by Harty123 » Wed Jun 29, 2011 8:19 pm
I got yesterday the PCB's. In the next week I will start the delivery of the kits 
In the first step I will offer 2 kits:
* EUzebox base kit for 19€
- PCB
- 2 SNES controller sockets
- 28,6363 MHz Quarz
- SD card socket
- SCART socket
* Euzebox standard kit 49€
- all electronic parts except the Parts for Midi Interface
- pre programmed ATMEGA644 with gameloader 0.4
-Harty
- EUzebox PCB's in stock now
- Euzebox_PCB.jpg (65.05 KiB) Viewed 805 times
In the first step I will offer 2 kits:
* EUzebox base kit for 19€
- PCB
- 2 SNES controller sockets
- 28,6363 MHz Quarz
- SD card socket
- SCART socket
* Euzebox standard kit 49€
- all electronic parts except the Parts for Midi Interface
- pre programmed ATMEGA644 with gameloader 0.4
-Harty
Life's too short to remove usb safely
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
-
Harty123 - Posts: 334
- Joined: Wed Jan 12, 2011 9:30 pm
- Location: PM, Germany
Re: EUzebox - a SCART based Uzebox for the EU
by martinsustek » Wed Jun 29, 2011 8:57 pm
Excelent news!
Will you also sell controllers?
Will you also sell controllers?
-
martinsustek - Posts: 115
- Joined: Sat Apr 30, 2011 11:34 am
- Location: Ostrava, Czech Republic
Re: EUzebox - a SCART based Uzebox for the EU
by Harty123 » Thu Jun 30, 2011 8:49 pm
Hi Martin,
No, I will not sell SNES controllers in the first step...
-Harty
No, I will not sell SNES controllers in the first step...
-Harty
Life's too short to remove usb safely
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
-
Harty123 - Posts: 334
- Joined: Wed Jan 12, 2011 9:30 pm
- Location: PM, Germany
Re: EUzebox - a SCART based Uzebox for the EU
by uze6666 » Thu Jun 30, 2011 9:35 pm
Hi Harty,
You can get 3rd party SNES conytrollers in small lots on Alibaba.com. Many manufacturers offers some for rock bottom prices.
Uze
No, I will not sell SNES controllers in the first step...
You can get 3rd party SNES conytrollers in small lots on Alibaba.com. Many manufacturers offers some for rock bottom prices.
Uze
-
uze6666 - Site Admin
- Posts: 2670
- Joined: Tue Aug 12, 2008 9:13 pm
- Location: Montreal, Canada
Re: EUzebox - a SCART based Uzebox for the EU
by Harty123 » Mon Jul 04, 2011 8:34 pm
Hi EUzebox friends,
Good news. The prototype of EUzebox V01-03-00 works fine:
In the next days I will start the delivery of EUzebox DIY kits.
You can order your kit here
-Harty
Good news. The prototype of EUzebox V01-03-00 works fine:
- assembled EUzebox DIY kit V01-03
- Euzebox V01-03-00.jpg (46.8 KiB) Viewed 745 times
In the next days I will start the delivery of EUzebox DIY kits.
You can order your kit here
-Harty
Last edited by Harty123 on Tue Aug 02, 2011 5:59 pm, edited 1 time in total.
Life's too short to remove usb safely
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
-
Harty123 - Posts: 334
- Joined: Wed Jan 12, 2011 9:30 pm
- Location: PM, Germany
Re: EUzebox - a SCART based Uzebox for the EU
by paul » Wed Jul 06, 2011 3:00 am
Congrats, Harty! You've done a really nice job with this.
-
paul - Posts: 416
- Joined: Sat May 02, 2009 8:41 am
- Location: Brisbane, Australia
Re: EUzebox - a SCART based Uzebox for the EU
by uze6666 » Wed Jul 06, 2011 4:59 am
Can't agree more Paul! And those SCART connectors are sure bulky but they somehow impose respect... 
Plus they save the AD725; on my BOM that's a non-negligible 20%!
-Uze
Plus they save the AD725; on my BOM that's a non-negligible 20%!-Uze
-
uze6666 - Site Admin
- Posts: 2670
- Joined: Tue Aug 12, 2008 9:13 pm
- Location: Montreal, Canada
Re: EUzebox - a SCART based Uzebox for the EU
by TonyD » Wed Jul 06, 2011 9:13 am
@Harty, any plans to sell just the PCB on its own?
- Tony
http://zuzebox.wordpress.com/
http://zuzebox.wordpress.com/
-
TonyD - Posts: 120
- Joined: Mon Oct 27, 2008 2:23 pm
- Location: Newcastle, UK
Who is online
Users browsing this forum: No registered users and 0 guests