Read on to see how he gets wireless power, clock and signal, all from a wire coil soldered directly to the chip:Last time, I posted an ultra-simple "from scratch" RFID reader, which uses no application-specific components: just a Propeller microcontroller and a few passive components. This time, I tried the opposite: building an RFID tag using no application-specific parts.
Well, my solution is full of dirty tricks, but the results aren't half bad. I used an Atmel AVR microcontroller (the ATtiny85) and a coil. That's it. You can optionally add a couple of capacitors to improve performance with some types of coils, but with this method it's possible to build a working RFID tag just by soldering a small inductor to an AVR chip [...]
http://scanwidget.livejournal.com/32928.html