Thank you Uze,
I downloaded and try the controller tester tool HEX.
It' works completely. But the Gameloader.hex doesn't work.
Do my Uzebox need the game pad control driver?
Sincerely,
Help me.
Re: Help me.
Hi Uze,
I foregot to tell you about one more thing.
At the try to the controller tester tool HEX, I connected the game pad to each port.
The Port2 was worked. However the Port 1 could not check in this case.
( I don't know why only Port1 could not check)
Is this case the Hardware trouble?
Thank you,
I foregot to tell you about one more thing.
At the try to the controller tester tool HEX, I connected the game pad to each port.
The Port2 was worked. However the Port 1 could not check in this case.
( I don't know why only Port1 could not check)
Is this case the Hardware trouble?
Thank you,
Re: Help me.
Aaah, now we're getting at it. Indeed there's seems to be some hardware issue in that case. That's pretty much the first time I heard issues with the AVCore though. If you would have a oscilloscope we could see what exactly is going on. If you still can, I would return it to Sparkfun for an exchange. In the contrary, all is not lost. It's possible to recompile most games & bootloader to use P2 as the main input. Naturally you won't be able to play 2 players game though.
-Uze
-Uze
Re: Help me.
Hi,
Thank you Uze. I appreciate your advice.
However, I don't know how to start the game from the Port2 with the SD Card.
( I tried to start the game from the Port2. But I could not start it )
In this case, is it the best way for me, if I return the AVCore to Sparkfun for an exchange ?
Sincerely,
Thank you Uze. I appreciate your advice.
However, I don't know how to start the game from the Port2 with the SD Card.
( I tried to start the game from the Port2. But I could not start it )
In this case, is it the best way for me, if I return the AVCore to Sparkfun for an exchange ?
Sincerely,
Re: Help me.
You can't, P2 port is not read in the bootloader. And even if you could, all games uses P1 port as the main port.However, I don't know how to start the game from the Port2 with the SD Card.
( I tried to start the game from the Port2. But I could not start it )
If they accept to take it back, then yes. Check how to return stuff here: http://www.sparkfun.com/static/37In this case, is it the best way for me, if I return the AVCore to Sparkfun for an exchange ?
In the mean time, attached is a bootloader version recompiled to use P2 port. Hopefully you'll have a little something that works!
-Uze
- Attachments
-
- Bootloader_P2.hex
- (11.06 KiB) Downloaded 388 times
Re: Help me.
Hi Uze,
Thank you for help me about the UZEBox trouble.
I have bought the new UZEBox from the Sparkfun.
The new one is no problem.
So, I found the trouble come from the AVRCore.
I am going to return the old one to the the Sparkfun.
My trouble is completely finish at the moment.
I appreciate for the trouble solution again.
And may the force be with you always.
Sincerely,
Thank you for help me about the UZEBox trouble.
I have bought the new UZEBox from the Sparkfun.
The new one is no problem.
So, I found the trouble come from the AVRCore.
I am going to return the old one to the the Sparkfun.
My trouble is completely finish at the moment.
I appreciate for the trouble solution again.
And may the force be with you always.
Sincerely,
Re: Help me.
Great, glad I could help!
-Uze
-Uze
Re: Help me.
Hi again, After the console working good few days i have problems:
the main menu has display errors.
i have ver 0.4.2 and the names of some games are writted up direct in the line "bootloader ver 0.4.2"or near the"page 1/2".
In the place that shoul be writted that names is a blank space.
The games are working but the menu is distorsionate even i reset the console.
the card was formated and this happend especially when i have 2 pages with games, if i have 1 page is more stable
the main menu has display errors.
i have ver 0.4.2 and the names of some games are writted up direct in the line "bootloader ver 0.4.2"or near the"page 1/2".
In the place that shoul be writted that names is a blank space.
The games are working but the menu is distorsionate even i reset the console.
the card was formated and this happend especially when i have 2 pages with games, if i have 1 page is more stable
Re: Help me.
Weird. Can you post a picture of the problem? If you have an ISP programmer I recommend you reflash the bootloader.
-Uze
-Uze
Re: Help me.
Sorry because i post so late, i don't have time and i didn t play too much on uzebox to try to make a picture. The error isn t all the time but from time to time. I reprogram the chip and the error persist. i have 644p
- Attachments
-
- EROR1.PNG (981.35 KiB) Viewed 7547 times