Hi All
As per the topic subject, I have a few questions and hopefully someone can help put me on the right track
I live in the UK and would like to connect the Uzebox to my Samsung LE32B450C4W Television set.
After doing a bit of research, I saw there is a version called the "EUzebox" that has RGB SCART output which seems the one to go for.
This only seems available in kit form (maybe I'm wrong - I hope I am ).
Problem is I cannot solder to save my life and don't know anyone locally that could do it for me
So I was wondering if there's any possibility to purchase a fully assembled "EUzebox" from anywhere, or maybe there's a member out there based in the UK that could build one for me or maybe selling one.
Any feedback would be appreciated.
Regards
Roukan / Jim
Interested in buying an Uzebox - some questions
Re: Interested in buying an Uzebox - some questions
Hi,
I have a lot of customers from the UK, but I can't give you their addresses or phone numbers without their agreement. Perhaps we will found another way ... sometimes I have full assembled prototypes from exhibitions or other events... I can inform you about this, if you want.
Cheers
-Harty
I have a lot of customers from the UK, but I can't give you their addresses or phone numbers without their agreement. Perhaps we will found another way ... sometimes I have full assembled prototypes from exhibitions or other events... I can inform you about this, if you want.
Cheers
-Harty
Life's too short to remove usb safely
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
Re: Interested in buying an Uzebox - some questions
Hi Harty
I understand that due to my lack of soldering skills this could take a while (hopefully not), in the meantime I'm having a play around with the Emulator and I have just setup the development environment to familiarise myself with that.
Thanks for your reply
Regards
Roukan / Jim
Quite understandable, maybe some of them will hopefully see this post and respond.Harty123 wrote: I have a lot of customers from the UK, but I can't give you their addresses or phone numbers without their agreement.
By all means let me know if you have one become available and we can take it from there.Harty123 wrote: Perhaps we will found another way ... sometimes I have full assembled prototypes from exhibitions or other events... I can inform you about this, if you want.
I understand that due to my lack of soldering skills this could take a while (hopefully not), in the meantime I'm having a play around with the Emulator and I have just setup the development environment to familiarise myself with that.
Thanks for your reply
Regards
Roukan / Jim
Re: Interested in buying an Uzebox - some questions
Apart form the SD card slot and the SNES connector, Harty's kit is through-hole only, which means there are no special soldering skills or tools required; and the slot and connectors are easy to solder, too. Any 30..50W soldering iron with fine tip and Sn60Pb40 with flux and <1mm diameter will do. Buy a small ring of 0,5mm wire and a blank board with hundreds of small copper eyelets on it to practice; once you manage to solder wires to such eyelets without having it come off you are ready for the kit. (Clue: first the wire goes through the eyelet, then the tip goes to the wire, then to the eyelet, take away tip, then put the solder to both the eyelet and wire. The solder has to melt on the eyelet and wire, not on the tip. That's the whole magic of soldering.)Roukan wrote:I understand that due to my lack of soldering skills
Re: Interested in buying an Uzebox - some questions
I agree with Janka, building the kit is relatively easy and is a great way to learn soldering. Plus it very rewarding to actually see something you build work! There's tons of tutorials on youtube to help.
Re: Interested in buying an Uzebox - some questions
@Janka - Thanks for posting the tips - always appreciated
One thing I failed to mention in my original post:
I used to do a lot of competitive bicycle racing (both on-road and off) and through out the years had quite a few crashes (some not so painful - others a bit more so).
After around eight years or so I started having problems with my left arm (all the way shoulder to fingers), pain / weakness / sometimes loss of control like muscle twitches/motor tics (for want of a better description). After consultation with doctors/physiotherapists, they came to the decision that I had trapped nerves(s) in my spine which where very likely a result of the impacts suffered in the cycling accidents.
Sadly the physiotherapy (traction on my spine and so on) treatment did nothing to ease the problem. That was around ten years ago and to this day it still plagues me at times and though the main focal point of the problem is my left arm, over recent years I started getting the muscle twitches/motor tics at random places all over my body.
Anyway enough of the life stories, but as I'm sure you can understand this combined with the lack of soldering skills has an even greater potential for disaster.
Though I'd be missing out on the reward of building my own, I more than make up for it on the programming front when I see my creations up on screen not matter how good or bad they may be
Cheers
Roukan / Jim
I can see where you are coming from here and fully agree that it's very rewarding to see something one has built come to lifeuze6666 wrote:I agree with Janka, building the kit is relatively easy and is a great way to learn soldering. Plus it very rewarding to actually see something you build work! There's tons of tutorials on youtube to help.
One thing I failed to mention in my original post:
I used to do a lot of competitive bicycle racing (both on-road and off) and through out the years had quite a few crashes (some not so painful - others a bit more so).
After around eight years or so I started having problems with my left arm (all the way shoulder to fingers), pain / weakness / sometimes loss of control like muscle twitches/motor tics (for want of a better description). After consultation with doctors/physiotherapists, they came to the decision that I had trapped nerves(s) in my spine which where very likely a result of the impacts suffered in the cycling accidents.
Sadly the physiotherapy (traction on my spine and so on) treatment did nothing to ease the problem. That was around ten years ago and to this day it still plagues me at times and though the main focal point of the problem is my left arm, over recent years I started getting the muscle twitches/motor tics at random places all over my body.
Anyway enough of the life stories, but as I'm sure you can understand this combined with the lack of soldering skills has an even greater potential for disaster.
Though I'd be missing out on the reward of building my own, I more than make up for it on the programming front when I see my creations up on screen not matter how good or bad they may be
Cheers
Roukan / Jim
Re: Interested in buying an Uzebox - some questions
a very sad story. If you want, I can sell my enclosure prototype to you. It's a assembled PCB built-in an enclosure prototype (you can see it in the EUzebox thread).... It's not so perfect as the series enclosures, but it looks really good.Roukan wrote: After around eight years or so I started having problems with my left arm (all the way shoulder to fingers), pain / weakness / sometimes loss of control like muscle twitches/motor tics (for want of a better description). After consultation with doctors/physiotherapists, they came to the decision that I had trapped nerves(s) in my spine which where very likely a result of the impacts suffered in the cycling accidents.
Sadly the physiotherapy (traction on my spine and so on) treatment did nothing to ease the problem. That was around ten years ago and to this day it still plagues me at times and though the main focal point of the problem is my left arm, over recent years I started getting the muscle twitches/motor tics at random places all over my body.
Life's too short to remove usb safely
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
Web: www.hwhardsoft.de
http://www.facebook.com/hwhardsoft
YouTube: http://www.youtube.com/user/hwhardsoft
Re: Interested in buying an Uzebox - some questions
Hi HartyHarty123 wrote:Roukan wrote: a very sad story. If you want, I can sell my enclosure prototype to you. It's a assembled PCB built-in an enclosure prototype (you can see it in the EUzebox thread).... It's not so perfect as the series enclosures, but it looks really good.
It's very kind of you to offer me the chance to purchase your prototype to me
Can you PM me with the details / cost / payment method details etc so we can get the ball rolling?
Cheers
Roukan / Jim
Re: Interested in buying an Uzebox - some questions
Quick Update:
Well she's arrived
Just like to say a big thank you to "Harty123" for helping me out by selling me one of his own personal EUzebox's.
Just had it hooked up to my Samsung 32" LCD TV and the Audio / Video are great, though I think I'll try and source a much smaller TV at some point as those pixels are some damn big !
Cheers
Roukan / Jim
Well she's arrived
Just like to say a big thank you to "Harty123" for helping me out by selling me one of his own personal EUzebox's.
Just had it hooked up to my Samsung 32" LCD TV and the Audio / Video are great, though I think I'll try and source a much smaller TV at some point as those pixels are some damn big !
Cheers
Roukan / Jim
Re: Interested in buying an Uzebox - some questions
It's a SHE? I haven't realized that until now. Must... resist... to... hug...Roukan wrote:Well she's arrived