Permission
Permission
Would like to know if we have permission to download the schematic and have the boards made ourselves? If so what are the latest files available to send off to a PCB maker?
Re: Permission
Hi,
Not only you have the rights (it's licenced under GPL), it's encouraged. Download the schematics from this page. Use revision F2, it's the latest and greatest.
Cheers
Not only you have the rights (it's licenced under GPL), it's encouraged. Download the schematics from this page. Use revision F2, it's the latest and greatest.
Cheers
Re: Permission
OK I am so new to this so I am sorry for sounding so ignorant. I am wanting to order the boards naturally. But there are things I dont really understand yet. Like the they are asking the following.
I am waning to order from www.4pcb.com
Layer Count:
X Dimension
Y Dimension
Array
Array X dim
Array Y Dim
Array Up
Tab-rout?
Scoring
Material Type
Finish Thickness Finish Plating
Gold Fingers
Soldermask Sides: guessing both
Silkscreen sides: guessing both
Soldermask Color, silkscreen color: my guessing my choice
Copper Wt.(outer and inner)
Certifinations and Qualifications
Blind/Buired Vias
Via-in-pad
micorvias
soldermask plugged vias
Controlled dielectric
controlled impedance
plated slots
plated edges
counterbores
countersinks
castellated holes
I am waning to order from www.4pcb.com
Layer Count:
X Dimension
Y Dimension
Array
Array X dim
Array Y Dim
Array Up
Tab-rout?
Scoring
Material Type
Finish Thickness Finish Plating
Gold Fingers
Soldermask Sides: guessing both
Silkscreen sides: guessing both
Soldermask Color, silkscreen color: my guessing my choice
Copper Wt.(outer and inner)
Certifinations and Qualifications
Blind/Buired Vias
Via-in-pad
micorvias
soldermask plugged vias
Controlled dielectric
controlled impedance
plated slots
plated edges
counterbores
countersinks
castellated holes
Re: Permission
I don't know 4pcb so you'll have to contact them for details, but I can see it's relatively expensive. You are better off with IteadStudio.com, it's where I made mine. It's very good quality and unbeatable for the price. You can simply send them the gerber zip file as is, it contains all they need to make the pcb.