Yes I will later offer a milled Hammond enclosure too. Here are some impressions about the first prototype PCB in Hammond 1455L1201 enclosure...
-Harty
Hi Harty, do you already sell a milled Hammond case for the EUzebox?
Couldn't find it on your homepage...
Greetings
TheChief
PS: It's time to prepare my EUzebox a nice home now...
Re: EUzebox - a SCART based Uzebox for the EU
Posted: Sun Apr 01, 2012 8:53 pm
by Harty123
Hi,
yes that was my first idea, but was never realized! Pls use Hammond 1455N1201 - this enclosure is a little bit higher...
-Harty
EUzebox kits for version 01-05
Posted: Tue Jun 19, 2012 6:51 pm
by Harty123
Hi,
the kits for the new EUzebox version V01-05 are ready for delivery. This is new in version 01-05
- integrated prototyping area
- extension socket (UART, ports for Uzetherm, GND, 3.3V, 5V)
- 6 pole pin header for ISP connector
- rated break point and connector for external power switch
- pre programmed with game loader 0.4.2
- BUGFIX: connection between left and right audio channel at SCART connector
- BUGFIX: integrated sync patch
- BUGFIX: +5V at pin 6 (VCC) of PC900
- BUGFIX: additional holes for scart connector
- BUGFIX: GND connection at pin 31 of ATMEGA
- BUGFIX: +5V at pin GND connection at pins 30 and 32 of ATMEGA
- BUGFIX: bigger space between solder pads and ground planes
You will find the circuit diagram of V01-05-01 in the first message of this thread.
Here are some pictures of the new version:
EUzebox V01-05 pcb
PCB_EUzebox_V01-05_small.jpg (27.22 KiB) Viewed 17455 times
assembled EUzebox V01-05
EUzebox_PCB_small.jpg (33.43 KiB) Viewed 17460 times
at the moment I'm preparing an enclosure kit for the EUzebox 01-03 and 01-05. It based on a slim aluminium case of a german manufacturer and is much smaller as the Hammond case:
front view
proma_case2.jpg (45.84 KiB) Viewed 17275 times
Back side
proma_case1.jpg (23.68 KiB) Viewed 17274 times
The kit comes with aluminium case, 2 milled front plates (back and front) made from black plastic, an illuminated red reset button, 4 rubber foots, cable and socket for reset button and 8 screws. The estimated price is 25€ and estimated date of delivery oktober 2012...
-Harty
Re: EUzebox - a SCART based Uzebox for the EU
Posted: Wed Aug 29, 2012 7:26 pm
by uze6666
Yowza! Very cool case!
Re: EUzebox - a SCART based Uzebox for the EU
Posted: Sat Sep 15, 2012 5:30 pm
by Harty123
Yesterday I got 100 aluminium parts for the new enclosure kit...
Aluminium enclosure part for the EUzebox enclosure kit
aluminium_enclosures.png (436.56 KiB) Viewed 17203 times
I will prepare the enclosure kits in the next two weeks.
Re: EUzebox - a SCART based Uzebox for the EU
Posted: Mon Oct 08, 2012 7:31 pm
by Harty123
Thomas - an E/Uzebox fan from Germany - sent me this "making of ..." Video:
Re: EUzebox - a SCART based Uzebox for the EU
Posted: Mon Oct 08, 2012 8:28 pm
by uze6666
Great video and an awesome music track, very nice work! With it's own casing too, looks very pro to me...