EUzebox - a SCART based Uzebox for the EU

Topics regarding the Uzebox hardware/AVCore/BaseBoard (i.e: PCB, resistors, connectors, part list, schematics, hardware issues, etc.) should go here.
User avatar
TheChief
Posts: 11
Joined: Sat Aug 27, 2011 2:08 pm
Location: Germany

Re: EUzebox - a SCART based Uzebox for the EU

Post by TheChief » Sun Apr 01, 2012 3:52 pm

Harty123 wrote:Hi,

@Paul: Thank you.

@Uze:

Yes I will later offer a milled Hammond enclosure too. Here are some impressions about the first prototype PCB in Hammond 1455L1201 enclosure...

-Harty
Hi Harty, do you already sell a milled Hammond case for the EUzebox?
Couldn't find it on your homepage... ;-)

Greetings

TheChief

PS: It's time to prepare my EUzebox a nice home now... :-)

User avatar
Harty123
Posts: 467
Joined: Wed Jan 12, 2011 9:30 pm
Location: PM, Germany
Contact:

Re: EUzebox - a SCART based Uzebox for the EU

Post by Harty123 » Sun Apr 01, 2012 8:53 pm

Hi,

yes that was my first idea, but was never realized! Pls use Hammond 1455N1201 - this enclosure is a little bit higher...

-Harty

User avatar
Harty123
Posts: 467
Joined: Wed Jan 12, 2011 9:30 pm
Location: PM, Germany
Contact:

EUzebox kits for version 01-05

Post by Harty123 » Tue Jun 19, 2012 6:51 pm

Hi,

the kits for the new EUzebox version V01-05 are ready for delivery. This is new in version 01-05

- integrated prototyping area
- extension socket (UART, ports for Uzetherm, GND, 3.3V, 5V)
- 6 pole pin header for ISP connector
- rated break point and connector for external power switch
- pre programmed with game loader 0.4.2
- BUGFIX: connection between left and right audio channel at SCART connector
- BUGFIX: integrated sync patch
- BUGFIX: +5V at pin 6 (VCC) of PC900
- BUGFIX: additional holes for scart connector
- BUGFIX: GND connection at pin 31 of ATMEGA
- BUGFIX: +5V at pin GND connection at pins 30 and 32 of ATMEGA
- BUGFIX: bigger space between solder pads and ground planes

You will find the circuit diagram of V01-05-01 in the first message of this thread.

Here are some pictures of the new version:
PCB_EUzebox_V01-05_small.jpg
EUzebox V01-05 pcb
PCB_EUzebox_V01-05_small.jpg (27.22 KiB) Viewed 6685 times
EUzebox_PCB_small.jpg
assembled EUzebox V01-05
EUzebox_PCB_small.jpg (33.43 KiB) Viewed 6690 times
Euzebox_front.jpg
EUzebox V01-05 in Hammond case
front view
Euzebox_front.jpg (54.13 KiB) Viewed 6690 times
EUzebox_back.jpg
EUzebox V01-05 in Hammond case
back view
EUzebox_back.jpg (55.2 KiB) Viewed 6687 times
You can order the kits and some accessories at my new website http://www.hwhardsoft.de

-Harty

emch
Posts: 13
Joined: Fri Jun 08, 2012 6:05 pm
Location: France
Contact:

Re: EUzebox - a SCART based Uzebox for the EU

Post by emch » Wed Jun 20, 2012 12:32 pm

Very good news!

I'll order one soon ...
Congratulations on the work.
Cheers!
emch / F4GTL
Currently writing a EUzebox-from-scratch tutorial/ebook.

User avatar
Harty123
Posts: 467
Joined: Wed Jan 12, 2011 9:30 pm
Location: PM, Germany
Contact:

Re: EUzebox - a SCART based Uzebox for the EU

Post by Harty123 » Sun Jun 24, 2012 11:13 am

emch wrote:Very good news!

I'll order one soon ...
Congratulations on the work.
Thank you very much. :D You will find in my new webshop the kits and accessories...

Here you will find an actual report about the EUzebox kits in french:

http://www.open-consoles.com/t475-uzebox#27932

-Harty

User avatar
Harty123
Posts: 467
Joined: Wed Jan 12, 2011 9:30 pm
Location: PM, Germany
Contact:

Re: EUzebox - a SCART based Uzebox for the EU

Post by Harty123 » Wed Aug 29, 2012 7:24 pm

Hi,

at the moment I'm preparing an enclosure kit for the EUzebox 01-03 and 01-05. It based on a slim aluminium case of a german manufacturer and is much smaller as the Hammond case:
proma_case2.jpg
front view
proma_case2.jpg (45.84 KiB) Viewed 6505 times
proma_case1.jpg
Back side
proma_case1.jpg (23.68 KiB) Viewed 6504 times
The kit comes with aluminium case, 2 milled front plates (back and front) made from black plastic, an illuminated red reset button, 4 rubber foots, cable and socket for reset button and 8 screws. The estimated price is 25€ and estimated date of delivery oktober 2012...

-Harty

User avatar
uze6666
Site Admin
Posts: 4448
Joined: Tue Aug 12, 2008 9:13 pm
Location: Montreal, Canada
Contact:

Re: EUzebox - a SCART based Uzebox for the EU

Post by uze6666 » Wed Aug 29, 2012 7:26 pm

Yowza! Very cool case! :mrgreen:

User avatar
Harty123
Posts: 467
Joined: Wed Jan 12, 2011 9:30 pm
Location: PM, Germany
Contact:

Re: EUzebox - a SCART based Uzebox for the EU

Post by Harty123 » Sat Sep 15, 2012 5:30 pm

Yesterday I got 100 aluminium parts for the new enclosure kit...
aluminium_enclosures.png
Aluminium enclosure part for the EUzebox enclosure kit
aluminium_enclosures.png (436.56 KiB) Viewed 6433 times
I will prepare the enclosure kits in the next two weeks.

User avatar
Harty123
Posts: 467
Joined: Wed Jan 12, 2011 9:30 pm
Location: PM, Germany
Contact:

Re: EUzebox - a SCART based Uzebox for the EU

Post by Harty123 » Mon Oct 08, 2012 7:31 pm

Thomas - an E/Uzebox fan from Germany - sent me this "making of ..." Video:


User avatar
uze6666
Site Admin
Posts: 4448
Joined: Tue Aug 12, 2008 9:13 pm
Location: Montreal, Canada
Contact:

Re: EUzebox - a SCART based Uzebox for the EU

Post by uze6666 » Mon Oct 08, 2012 8:28 pm

Great video and an awesome music track, very nice work! With it's own casing too, looks very pro to me... :mrgreen:

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests