Uzebox AVCore 1.2

Topics regarding the Uzebox hardware/AVCore/BaseBoard (i.e: PCB, resistors, connectors, part list, schematics, hardware issues, etc.) should go here.
Post Reply
havok1919
Posts: 474
Joined: Thu Aug 28, 2008 9:44 pm
Location: Vancouver, WA
Contact:

Uzebox AVCore 1.2

Post by havok1919 »

Just for reference, here's the 1.2 rev of the AVCore. (I don't know what happened to 1.1) ;)

http://www.embeddedengineeringllc.com/U ... ematic.pdf

This is probably about 99% the same as a production version, just pending on what I decide to do with pin 17. (Either a 3.3V power input for the 3.3V version, or a 'lockout' key to prevent a 3.3V board from being plugged into a 5V socket.)

-Clay
Post Reply