So, I was curious if one could make a bi-directional logic level converter with through hole components kind of on the cheap and I came up with http://letsmakerobots.com/node/34444
uze6666: Thoughts? Might be a good/cheap way to isolate the SD card on the SPI Bus... Just a thought.
Cheap logic level circuit
Re: Cheap logic level circuit
So you still have issues with the sd card or resistor network? I though it was due to bad wires on your proto board...
-
- Posts: 86
- Joined: Sun Jan 04, 2015 4:38 am
Re: Cheap logic level circuit
I do still have odd issues, but I am about to put the bad wiring suspect to bed. I designed a small board to mount the chip(s) on since for the most part, the circuit works. If it still fails, I am going to remove the resistor net and wire in a level converter. But I do still suspect wiring after today's tests. So 12ish days for the board. I might be asking for a new bread board and better jumper wires for my birthday.