Page 1 of 1

diy euzebox case

Posted: Fri Feb 07, 2014 5:17 pm
by schepers_cp
hello all,

i made a euzebox case in google sketchup:
euzebox case.jpg
euzebox case.jpg (61.45 KiB) Viewed 5371 times
from left to right: euzebox with connectors layout, top and bottom of case, assembled sample

it needs 2x 3MM self tapping screws to assemble.

Re: diy euzebox case

Posted: Sat Feb 08, 2014 10:04 pm
by Harty123
looks nice! What do yo want to do with it?

Re: diy euzebox case

Posted: Sat Feb 08, 2014 10:13 pm
by schepers_cp
i don't know, my first intention was to put it on shapeways or something so people can let it 3d print, but they ask way too much money for 3d printed stuff in my opinion~

so i made the file publicly so everyone can do with it what they want :D

Re: diy euzebox case

Posted: Sat Feb 08, 2014 10:28 pm
by Harty123
An enclosure for the Uzebox would be also interesting. (For the EUzebox a DIY enclosure set is available but not for the Uzebox...)

Perhaps you can create such an Google Sketch file also for the Uzebox...

Re: diy euzebox case

Posted: Sun Feb 09, 2014 2:52 am
by uze6666
Yeah, some enclosures designs for the Uzebox would be neat. I for myself wanted to buy a 3D printer for a while for pretty much just do project enclosures. But the tag prices for entry models are still too high to my taste and quality is still not high enough for me.

Re: diy euzebox case

Posted: Sun Feb 09, 2014 2:54 am
by schepers_cp
you can try shapeways if you're desperately for one, though it's on the expensive side for (mass)production..

edit:

this is a case with 3D text on it (it's just a sample)

maybe something like this may be usefull for the first prize of the UCC2014?
euzebox case2.png
euzebox case2.png (43.45 KiB) Viewed 5284 times