Controller

Topics regarding the Uzebox hardware/AVCore/BaseBoard (i.e: PCB, resistors, connectors, part list, schematics, hardware issues, etc.) should go here.
User avatar
uze6666
Site Admin
Posts: 4487
Joined: Tue Aug 12, 2008 9:13 pm
Location: Montreal, Canada
Contact:

Re: Controller

Post by uze6666 » Tue Mar 19, 2013 1:03 am

I guess you have no way to test just the Asciipad in the bottloader? For me, it works. But I can't reproduce the SD card problem and, unless I made a mistake, I added Harty's code. So dunno what is going on... :(

User avatar
Kilo
Posts: 277
Joined: Wed Dec 19, 2012 3:43 pm
Location: AC, Germany

Re: Controller

Post by Kilo » Tue Mar 19, 2013 8:21 am

Well, no way to test the Asciipad as long as the bootloader doesn't work with the SD.
Where is the new source of the bootloader? Mh... Harty's Bootloader works fine... the only changes are the WaitVsync states..
But when you added Hartys code, I can't understand why it isn't working!?!?
The last digit of Pi is 7! I calculated this, as I counted to infinity yesterday!

User avatar
uze6666
Site Admin
Posts: 4487
Joined: Tue Aug 12, 2008 9:13 pm
Location: Montreal, Canada
Contact:

Re: Controller

Post by uze6666 » Tue Mar 19, 2013 5:47 pm

The new sources were commited to the trunk. Perhaps you can give it a fresh look.

User avatar
Kilo
Posts: 277
Joined: Wed Dec 19, 2012 3:43 pm
Location: AC, Germany

Re: Controller

Post by Kilo » Tue Mar 19, 2013 7:08 pm

strange... it's the same like Hartys one...
mhh... but why it doesn't work??

Edit: Now the whole Uzebox is going crazy...
broke down while playing, normal Controller doesn't work sometimes, gameloader freezed sometimes... :evil:
Could it be that the Atmega comes to an end???

damn, I need to be at the first three places on the comp! :lol:
The last digit of Pi is 7! I calculated this, as I counted to infinity yesterday!

User avatar
uze6666
Site Admin
Posts: 4487
Joined: Tue Aug 12, 2008 9:13 pm
Location: Montreal, Canada
Contact:

Re: Controller

Post by uze6666 » Tue Mar 19, 2013 10:01 pm

Could it be that the Atmega comes to an end???
Possible, but you'd be one of the first to experience this issue... :?

User avatar
Kilo
Posts: 277
Joined: Wed Dec 19, 2012 3:43 pm
Location: AC, Germany

Re: Controller

Post by Kilo » Wed Mar 20, 2013 8:08 am

we need a counter how often the Atmega is flashed... LOL

Mh... but it could also be that the gamepad makes some issues... But I don't know why.
I'd nothing changed...
The last digit of Pi is 7! I calculated this, as I counted to infinity yesterday!

User avatar
Kilo
Posts: 277
Joined: Wed Dec 19, 2012 3:43 pm
Location: AC, Germany

Re: Controller

Post by Kilo » Thu Mar 21, 2013 9:49 pm

Ok, it's the Box... tested it with other controllers... argh
The box freezed everytime...
The last digit of Pi is 7! I calculated this, as I counted to infinity yesterday!

User avatar
Kerby
Posts: 85
Joined: Wed Feb 06, 2013 6:02 pm

Re: Controller

Post by Kerby » Fri Mar 22, 2013 12:22 pm

I somehow when downloading a game through the bootloader all stopped working, black screen and all, silence! I had to program Atmega programmer! And then stopped working A and B buttons on the controller! But there is another reason probably ...

User avatar
Kilo
Posts: 277
Joined: Wed Dec 19, 2012 3:43 pm
Location: AC, Germany

Re: Controller

Post by Kilo » Sat Mar 23, 2013 4:18 pm

When I start the box, and change the page in the Game Loader or start a game, it crashes the box. Only when I remove the controller and plug it again it works again! The controllers do not seem to be the problem, because I have tested different.
So, something must have happened while playing... I've tried an other Atemga... same problem!!
The last digit of Pi is 7! I calculated this, as I counted to infinity yesterday!

User avatar
D3thAdd3r
Posts: 2430
Joined: Wed Apr 29, 2009 10:00 am
Location: Minneapolis, United States

Re: Controller

Post by D3thAdd3r » Mon Mar 25, 2013 7:30 pm

Are you using a EUzebox or a home made hardware?

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests