Help, I need some parts for AV

Topics regarding the Uzebox hardware/AVCore/BaseBoard (i.e: PCB, resistors, connectors, part list, schematics, hardware issues, etc.) should go here.
Post Reply
User avatar
Kilo
Posts: 277
Joined: Wed Dec 19, 2012 3:43 pm
Location: AC, Germany

Help, I need some parts for AV

Post by Kilo » Sun Jan 06, 2013 12:59 am

Hey guys,

I've got a problem:
Last week I bought a new tv... with 3 HDMI and Composite input. NO Scart which I need for my EUzebox!
So I want to build a new one with AV/Composite... for this I need the special resistors which are very rare in Germany!!!!
Like 806 Ohm, 562 Ohm, etc.

Does anyone have a kit for one uzebox especially with resistors for me?????

Dominik "KILO"
The last digit of Pi is 7! I calculated this, as I counted to infinity yesterday!

User avatar
Janka
Posts: 213
Joined: Fri Sep 21, 2012 10:46 pm
Location: inside Out

Re: Help, I need some parts for AV

Post by Janka » Tue Jan 08, 2013 12:14 am

Take the nearest E24 value, the resistors are >1% tolerance anyway. So 562 Ohm -> 560 Ohm and 806 Ohm -> 820 Ohm.
http://de.wikipedia.org/wiki/E-Reihe

Does your new TV set have a VGA input? If yes, you could try if it accepts the EUzebox signals there (put CSYNC both on VSYNC and HSYNC).

User avatar
Kilo
Posts: 277
Joined: Wed Dec 19, 2012 3:43 pm
Location: AC, Germany

Re: Help, I need some parts for AV

Post by Kilo » Tue Jan 08, 2013 8:49 am

thank#s a lot but I solved the problem...

I bought a new one :D
Now the tv is bigger and better! With VGA and Scart and HDMI... nice!
The uzebox runs perfectly on 40" :mrgreen:

only problem: When I change the signal input to SCART, the TV recognizes a PAL signal but after a while the tv switches to NTSC and again to PAL
so every minute there will be a black screen for one second...it sucks!
It's like the tv doesn't know which signal it will use!
The last digit of Pi is 7! I calculated this, as I counted to infinity yesterday!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests