Do you access to a scope (work/friend/hackerspace) ?
Very first check I do if something does not have TV out is to see that the 14.xxxMhz signal is present on fclk of the AD723/725
This is a derived by 1/2 of the 28.xxx Mhz clock of the AVR.
Trying to burn the bootloader
-
- Posts: 1445
- Joined: Mon Feb 11, 2013 8:08 am
- Location: Brisbane, Australia
-
- Posts: 31
- Joined: Sat Apr 28, 2018 3:16 am
Re: Trying to burn the bootloader
Unlikely but I'll ask some of my colleagues.Do you access to a scope
I suspect my soldering job on that tiny SMD that converts video signals. I never soldered anything that small before. I mean, it looks fine! I inspected all connections visually and it seemed fine, no shortings, good contacts.
Re: Trying to burn the bootloader
Try reheating the solder, just to make sure there are no cold solder joints. I had the same issue with no video output when I first soldered it, turned out to be cold solder joints.diegzumillo wrote: ↑Thu Sep 20, 2018 1:38 am I suspect my soldering job on that tiny SMD that converts video signals. I never soldered anything that small before. I mean, it looks fine! I inspected all connections visually and it seemed fine, no shortings, good contacts.
-
- Posts: 31
- Joined: Sat Apr 28, 2018 3:16 am
Re: Trying to burn the bootloader
haha So I was heating up my cheap soldering machine just now, and when I went to solder it the tip fell off. Not the tip tip, the entire rod with the tip! it fell on some rubbery thing I had which started making smoke, almost set off my fire alarm. It was quite a scene. Disastrous but kinda funny. This thing is a hazard. Anyway, I'll get to this on sunday. I took a sick day today and got to unwind a little bit and play around with uzebox stuff.
Re: Trying to burn the bootloader
If you can plug some speakers in the Uzebox's audio out (the television is not suitable for this as it might refuse to do anything with the audio without a video signal), you may test whether the ATmega644 is fine. Use Arkanoid (from the master repo) as this game starts with music playing, burn it's .hex on the Uzebox by your programmer, and see what happens. If the music plays, and feels like that you may hear when running in the emulator (frequency is not off for example), then indeed the problem should be around the AD725 (the SMD chip).
And ditch that soldering machine before it does more harm
And ditch that soldering machine before it does more harm