Topics regarding the Uzebox hardware/AVCore/BaseBoard (i.e: PCB, resistors, connectors, part list, schematics, hardware issues, etc.) should go here.
- Posts: 27
- Joined: Mon Feb 11, 2019 4:27 am
L4rry wrote: ↑
Tue Jul 30, 2019 5:16 pm
So I've finally assembled my first uzebox portable
Great, another bot posting pron.
Looks damn sexy.
- Posts: 667
- Joined: Wed Feb 01, 2012 8:23 pm
- Location: Detroit, United States
Hey awesome! Another portable! I'm hoping for more Wi-Fi games in the future.
- Site Admin
- Posts: 4454
- Joined: Tue Aug 12, 2008 9:13 pm
- Location: Montreal, Canada
Thanks for posting! For the screws, I got them from HobbyKing, the exact part is in in the BOM if I'm not mistaken.
- Posts: 945
- Joined: Thu Jun 04, 2015 5:35 pm
I've finally gotten some serious play time in on my portable, and it is freaking awesome!
Thank you Alec!
I needed to add a bit more kapton tape inside to prevent a short from occuring when playing Bugz. Apparently I squeeze the controller super hard when I am constantly holding down B and rolling my thumb to press A at the same time. Based on the hand cramp I got after beating Bugz on the train ride home today, I would have to say "certainly" I squeeze the controller too hard rather than "apparently".
This is perfect for showing off to people. I can just walk around with it and hand it to someone for them to play. Much easier than the soft cooler I would carry around with me that had a display and its power brick, a computer speaker and its power brick, the Uzebox and its power brick, and then going "crap, there are only two outlets here".
I've even had people ask me "Is that a new Nintendo?"
Who is online
Users browsing this forum: No registered users and 19 guests